Vivotek FD8162 User Manual page 88

VIVOTEK
This option allows the Network Camera to trigger when the recording disk is full or when recording
starts to overwrite older data�
■ Camera tampering detection
This option allows the Network Camera to trigger when the camera detects that is is being tampered
with� To enable this function, you need to configure the Tampering Detection option first. Please refer
to page 102 for detailed information�
■ Manual Trigger
This option allows user to enable event triggers manually by clicking the on/off button on the
homepage. Please configure 1 ~ 3 events before using this function.
3� Action
Define the actions to be performed by the Network Camera when a trigger
is activated�
■ Trigger digital output for
Select this option to turn on the external digital output device when a trigger is activated� Specify the
length of the trigger interval in the text box�
■ Backup media if the network is disconnected
Select this option to backup media file on SD card if the network is disconnected. Please note that this
function will only apply after you set up the network storage (NAS)� For more information about how to
set up network storage, please refer to page 105�
88 - User's Manual
seconds