Vivotek FD8162 User Manual page 136

VIVOTEK
wdrc_strength 0~2
agc 0,1,2
agcmode auto,fixed
maxgain 0~100
mingain 0~100
autoiris <boolean>
7.10 IR cut control
Group: ircutcontrol (capability.nvideoinprofile > 0)
NAME VALUE
mode auto,
day,
night,
di,
schedule
<product
dependent>
daymodebegintime 00:00~23:59
daymodeendtime 00:00~23:59
bwmode <boolean>
sensitivity low,
normal,
high
136 - User's Manual
0: off
1: auto
2: always on
3: keep current value
4/4 WDR enhanced.
0: low
1: medium
2: high
4/4 Set auto gain control to normal level or MAX level.
0->2x,
1->4x,
2->8x
(not used in FD8162)
4/4 Set auto gain control mode.
4/4 Manual set maximum gain value.
4/4 Manual set minimum gain value.
4/4 Enable auto Iris.
(not used in FD8162)
SECURITY DESCRIPTION
(get/set)
6/6 Set IR cut control mode
6/6 Day mode begin time
6/6 Day mod end time
6/6 Switch to B/W in night mode if enabled
6/6 Sensitivity of light sensor