Vivotek FD8162 User Manual page 153

di <integer>
mdwin <integer>
mdwin0 <integer>
vi <integer>
inter 1~999
weekday 0~127
begintime hh:mm
endtime hh:mm
lowlightcondition 0, 1
<product dependent>
action_do_i<0~(ndo-1 0, 1
)>_enable
action_do_i<0~(ndo-1 1~999
)>_duration
6/6 Indicate the source id of di trigger.
This field is required when trigger condition is "di".
One bit represents one digital input. The LSB
indicates DI 0.
6/6 Indicate the source window id of motion detection.
This field is required when trigger condition is "md".
One bit represents one window.
The LSB indicates the 1
For example, to detect the 1
mdwin as 5.
6/6 Similar to mdwin. The parameter takes effect when
profile 1 of motion detection is enabled.
6/6 Indicate the source id of vi trigger.
This field is required when trigger condition is "vi".
One bit represents one digital input. The LSB
indicates VI 0.
6/6 Interval of snapshots in minutes.
This field is used when trigger condition is "seq".
6/6 Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday and
Sunday, set weekday as 66.
6/6 Begin time of the weekly schedule.
6/6 End time of the weekly schedule.
(00:00 ~ 24:00 sets schedule as always on)
6/6 Switch on white light LED in low light condition
0 => Do action at all times
1 => Do action in low-light conditions
6/6 Enable or disable trigger digital output.
6/6 Duration of the digital output trigger in seconds.
VIVOTEK
st
window.
st rd
and 3 windows, set
User's Manual - 153