Ptz > Ptz Settings - Vivotek IP9165-LPC User Manual

VIVOTEK
PTZ > PTZ settings
This section explains how to control the Network Camera's Pan/Tilt/Zoom operation.
1. Digital: Control the e-PTZ operation. Within a field of view, it allows users to quickly move the
focus to a target area for close-up viewing without physically moving the camera.
2. Mechanical: Connect the Network Camera to a PTZ driver or scanner via the RS485
interface.
Digital PTZ Operation (E-PTZ Operation)
The e-PTZ control settings section will be displayed as shown below:
x1.8
x1.8
For e-PTZ related details, please refer to page 110.
Auto pan/patrol speed: Select the speed from 1~5 (slow/fast) to set up the Auto pan/patrol speed control.
Zoom factor display
If you check this item, the zoom indicator will be displayed on the home page when you zoom in/out the
live viewing window as the picture shown on the next page.
When completed with the e-PTZ settings, click Save to enable the settings on this page.
108 - User's Manual