Vivotek FD8162 User Manual page 133

_quant 99, 100
s<0~(m-1)>_h264 0~51
_qvalue
s<0~(m-1)>_h264 1~100
_qpercent
s<0~(m-1)>_h264 1000~16000000
_bitrate
s<0~(m-1)>_h264 1~25,
_maxframe 26~30 (only for
NTSC or 60Hz
CMOS)
s<0~(m-1)>_h264 0~2
_profile
<product
dependent>
s<0~(m-1)>_mjpe 1~5
g_quant 99, 100
s<0~(m-1)>_mjpe 2~97
g_qvalue
s<0~(m-1)>_mjpe 1~100
g_qpercent
s<0~(m-1)>_mjpe 1~25,
g_maxframe 26~30 (only for
NTSC or 60Hz
CMOS)
piris_mode manual, indoor,
outdoor
piris_sensitivity 1~10
piris_response 1~10
piris_position 1~100
wdrc_mode 0~3
"ratecontrolmode".
99 is the customized manual input setting.
1 = worst quality, 5 = best quality.
100 is percentage mode.
4/4 Manual video quality level input.
(s<0~(m-1)>_h264_quant = 99)
4/4 Manual video quality level input.
(s<0~(m-1)>_h264_quant = 100)
4/4 Set bit rate in bps when choosing cbr in
"ratecontrolmode".
1/4 Set maximum frame rate in fps (for h264).
1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile
4/4 Quality of JPEG video.
99 is the customized manual input setting.
1 = worst quality, 5 = best quality.
100 is percentage mode.
4/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant = 99)
4/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant = 100)
1/4 Set maximum frame rate in fps (for JPEG).
1/4 P-Iris mode.
4/4 P-Iris sensitivity for indoor and outdoor mode.
4/4 P-Iris response time for indoor and outdoor mode.
1/4 P-Iris position for manual mode.
4/4 WDR enhanced.
0: off
1: auto
2: always on
3: keep current value
VIVOTEK
User's Manual - 133