Vivotek IP7361 User Manual page 88

VIVOTEK
■ Camera tampering detection
This option allows the Network Camera to trigger when the camera detects that is is being tampered
with� To enable this function, you need to configure the Tampering Detection option first. Please refer
to page 74 for detailed information�
Event Schedule
Specify the period for the event�
■ Select the days of the week.
■ Select the recording schedule in 24-hr time format.
Action
Define the actions to be performed by the Network Camera when a trigger is activated.
■ Trigger digital output for
Select this option to turn on the external digital output device when a trigger is activated� Specify the
length of the trigger interval in the text box�
■ Turn on IR illuminators for
Select this to turn on IR Illuminators when a trigger is activated every time or only in low light
conditions� Specify the length of trigger interval in the text box�
■ Move to preset location:
Select this option, the Network Camera will move to the preset location when a trigger is activated�
This function is only for Mechanical PTZ controlled via RS485 device. If you do not enable
RS485 settings, this item will not appear in this column� Please refer to Camera Control on page 75 for
detailed information�
88 - User's Manual
seconds
seconds