Vivotek IP7361 User Manual page 50

VIVOTEK
Note that as JPEG only transmits a series of JPEG images to the client, to enable the two-way audio
function, make sure the video mode is set to "MPEG-4" on the Audio and Video Settings page and the
media option is set to "Video and Audio" on the Client Settings page� Please refer to Client Settings on
page 26 and Audio and Video Settings on page 58�
Click to enable audio transmission to the Network Camera; click
microphone; click to turn off the audio� To stop talking, click
FTP
The FTP server allows the user to save recorded video clips� You can utilize VIVOTEK's Installation
Wizard 2 to upgrade the firmware via FTP server. By default, the FTP port is set to 21. It also can be
assigned to another port number between 1025 and 65535�
50 - User's Manual
America
Audio transmitted from operators
Audio is being transmitted to the Network Camera
Talk Button
Audio transmitted to operators Audio transmitted to operators
Taiwan
Mute
Mic Volume
to adjust the volume of
again�