Eptz Setting - Vivotek IP7361 User Manual

VIVOTEK
s<0~(m-1>_size <window size> 6/6

5.35 ePTZ Setting

Group: eptz_c<0~(n-1)> for n channel product.
PARAMETER VALUE
osdzoom <boolean> 1/4
smooth <boolean> 1/4
tiltspeed -5 ~ 5
panspeed -5 ~ 5
zoomspeed -5 ~ 5
autospeed 1 ~ 5
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product. and m is the number of streams which
support ePTZ.
PARAMETER VALUE
patrolseq string[120]
patroldwelling string[160]
i<0~19>_name string[40]
i<0~19>_pos <coordinate>
i<0~19>_size <window
size>
150 - User's Manual
ROI width and height. (width must be 16x and height must
be 8x)
SECURITY DESCRIPTION
(get/set)
Indicates multiple of zoom in is "on-screen display" or not
Indicates ePTZ is smooth or not.
1/7 Tilt speed (It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
1/7 Pan speed (It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
1/7 Zoom speed (It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
1/7 Auto pan/patrol speed (It should be set by eCamCtrl.cgi rather than by
setparam.cgi.)
SECURITY DESCRIPTION
(get/set)
1/4 The indexes of patrol points, separated by ","
1/4 The dwelling time of each patrol point, separated by ","
1/7 Name of ePTZ preset. (It should be set by eCamCtrl.cgi rather
than by setparam.cgi.)
1/7 Left-top corner coordinate of the preset. (It should be set by
eCamCtrl.cgi rather than by setparam.cgi.)
1/7 Width and height of the preset. (It should be set by
eCamCtrl.cgi rather than by setparam.cgi.)