Vivotek IP7361 User Manual page 138

VIVOTEK
5.22 UART Control
Group: uart (capability.nuart>0) (product dependent)
NAME
ptzdrivers_i<0~19, 127>_name
ptzdrivers_i<0~19, 127>_location
enablehttptunnel
Group: uart_i<0~(n-1)> n is uart port count
NAME
baudrate
databit
paritybit
stopbit
uartmode
customdrvcmd_i<0~9>
speedlink_i<0~4>_name
speedlink_i<0~4>_cmd
ptzdriver
5.23 SNMP
Group: snmp (capability.snmp) (product dependent)
NAME
v2
v3
secnamerw
secnamero
authpwrw
138 - User's Manual
VALUE
string[40]
string[128]
<boolean>
(capability.nuart>0)
VALUE
110,300,600,1200,2400,36
00,4800,7200,9600,19200,
38400,57600,115200
5,6,7,8
none, odd, even
1,2
rs485, rs232
string[128]
string[40]
string[128]
0~19, 127 (custom),
128 (no driver)
VALUE SECURITY
(get/set)
0~1 6/6
0~1 6/6
string[31] 6/6
string[31] 6/6
string[8~128] 6/6
SECURITY DESCRIPTION
(get/set)
1/4 Name of the PTZ driver.
1/4 Full path of the PTZ driver.
4/4 Enable HTTP tunnel channel to control
UART.
SECURITY DESCRIPTION
(get/set)
4/4 Set baud rate of COM port.
4/4 Data bits in a character frame.
4/4 For error checking.
4/4 1
2-1.5 , data bit is 5
2-2
4/4 RS485 or RS232.
1/4 PTZ command for custom
camera.
1/4 Additional PTZ command name.
1/4 Additional PTZ command list.
4/4 The PTZ driver is used by this
COM port.
DESCRIPTION
SNMP v2 enabled. 0 for disable, 1 for enable
SNMP v3 enabled. 0 for disable, 1 for enable
Read/write security name
Read only security name
Read/write authentication password