Vivotek IP7361 User Manual page 132

VIVOTEK
5.10 IR Cut Control
Group: ircutcontrol
NAME
mode
daymodebegintime
daymodeendtime
disableirled
bwmode
sensitivity
5.11 Image Setting per Channel
Group: image_c<0~(n-1)> for n channel products
NAME
brightness
saturation
contrast
sharpness
IBPE_edgeenable
IBPE_edgestrength
IBPE_nrenable
IBPE_nrmode
IBPE_nrstrength
132 - User's Manual
VALUE
auto, day, night, di,
schedule
00:00~23:59
00:00~23:59
<boolean>
<boolean>
low, normal, high
VALUE SECURITY
(get/set)
<product 4/4
dependent>
-5 ~ 5 4/4
-5 ~ 5 4/4
<product 4/4
dependent>
<boolean> 4/4
1 ~ 128 4/4
<boolean> 4/4
1 ~ 3 4/4
1 ~ 63 4/4
SECURITY DESCRIPTION
(get/set)
6/6 Set IR cut control mode
6/6 Day mode begin time
6/6 Day mod end time
6/6 Enable/disable IR led
6/6 Switch to B/W in night mode if enabled
6/6 Sensitivity of light sensor
DESCRIPTION
Adjust brightness of image according to mode
settings.
Adjust saturation of image according to mode settings.
Adjust contrast of image according to mode settings.
Adjust sharpness of image according to mode settings.
Enable edge enhancement.(Haydn only)
Adjust edge enhancement strength. 1 is minimum and
128 is maximum. (Haydn only)
Enable noise reduction. (Haydn only)
Adjust noise reduction mode.
1 => DeGaussian
2 => DeImpulse
3 => DeGaussian + DeImpulse
(Haydn only)
Adjust noise reduction strength. 1 is minimum and 63
is maximum. (Haydn only)