Vivotek IP7361 User Manual page 15

5� Tighten the lens cover�
6� Open the back cover�
7� Tear down the aluminum foil vacuum bag and take out the silica gel� Attach the silica gel to
the inner side of the back cover, then tighten the back cover� (Please replace the silica gel with
a new one if you open the back cover after installation�)
Note
If you want to use the supplied sun shield for outdoor environments, please follow the steps
below to install:
1 Tighten the supplied two screws
2 Attach the supplied sun shield to the Network Camera and slide it to the desired position
3 Fix the sun shield with the supplied two screws
1
3
6
5
2
7
User's Manual - 15
VIVOTEK