Set Server Parameter Values - Vivotek IP7361 User Manual

VIVOTEK

4. Set Server Parameter Values

Note: The access right depends on the URL directory.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/anonymous/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>][&return=<return page>]
http://<servername>/cgi-bin/viewer/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
http://<servername>/cgi-bin/operator/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
http://<servername>/cgi-bin/admin/setparam.cgi? <parameter>=<value>
[&<parameter>=<value>...][&update=<value>] [&return=<return page>]
PARAMETER VALUE
<group>_<n value to
ame> assigned
update <boolean>
return <return
page>
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: <length>\r\n
\r\n
<parameter pair>
where <parameter pair> is
<parameter>=<value>\r\n
[<parameter pair>]
Only the parameters that you set and are readable will be returned.
116 - User's Manual
DESCRIPTION
Assign <value> to the parameter <group>_<name>.
Set to 1 to update all fields (no need to update parameter in each group).
Redirect to the page <return page> after the parameter is assigned. The
<return page> can be a full URL path or relative path according to the current
path. If you omit this parameter, it will redirect to an empty page. (Note: The
return page can be a general HTML file (.htm, .html) or a VIVOTEK server
script executable (.vspx) file. It cannot be a CGI command or have any extra
parameters. This parameter must be placed at the end of the parameter list.