Vivotek IP7361 User Manual page 141

eptz
npreset
protocol_https
protocol_rtsp
protocol_sip
protocol_maxconnecti
on
protocol_rtp_multicas
t_scalable
protocol_rtp_multicas
t_backchannel
protocol_rtp_tcp
protocol_rtp_http
protocol_spush_mjpe
g
protocol_snmp
protocol_ipv6
videoin_type
videoin_resolution
videoin_maxframerat
e
<positive integer> 0/7
<positive integer> 0/7
< boolean > 0/7
< boolean > 0/7
<boolean> 0/7
<positive integer> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
0, 1, 2 0/7
<a list of available 0/7
resolution separated
by commas>
<a list of available 0/7
maximum frame rate
separated by
commas>
Bit 7 => External or built-in PT; (built-in),
1(external)
Bit 8 => Invalidate bit 1 ~ 7; 0(bit 1 ~ 7 are
valid), 1(bit 1 ~ 7 are invalid)
Bit 9 => Reserved bit; Invalidate lens_pan,
Lens_tilt, lens_zoon, lens_focus, len_iris.
0(fields are valid),
1(fields are invalid)
A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
Number of preset locations.
Indicate whether to support HTTP over SSL.
Indicate whether to support RTSP.
Indicate whether to support SIP.
The maximum allowed simultaneous
connections.
Indicate whether to support scalable
multicast.
Indicate whether to support backchannel
multicast.
Indicate whether to support RTP over TCP.
Indicate whether to support RTP over HTTP.
Indicate whether to support server push
MJPEG.
Indicate whether to support SNMP.
Indicate whether to support IPv6.
0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
Available resolutions list.
Available maximum frame list.
VIVOTEK
User's Manual - 141