Vivotek IP7361 User Manual page 157

Server will accept the file named <file name> to upgrade the firmware and return with <return page> if
indicated.
6.11 Camera Control (capability.ptzenabled=1)
Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/viewer/camctrl.cgi?[channel=<value>][&camid=<value>][&move=<value
>]
[&focus=<value>][&iris=<value>][&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>]
[&speedapp=<value>][&auto=<value>][&zoom=<value>][&zooming=<value>][&speedlink=<value>]
[&vx=<value>&vy=<value>&vs=<value>] [&return=<return page>]
PARAMETER VALUE
channel <0~(n-1)>
camid 0,<positive integer>
move home
up
down
left
right
speedpan -5 ~ 5
speedtilt -5 ~ 5
speedzoom -5 ~ 5
speedfocus -5 ~ 5
speedapp -5 ~ 5
auto pan
patrol
stop
zoom wide
tele
stop
zooming wide
tele
vx <integer , excluding 0>
vy <integer>
vs 0 ~ 7
DESCRIPTION
Channel of video source.
Camera ID.
Move to camera to home position.
Move camera up.
Move camera down.
Move camera left.
Move camera right.
Set the pan speed.
Set the tilt speed.
Set the zoom speed.
Set the focus speed.
Set the auto pan/patrol speed.
Auto pan.
Auto patrol.
Stop camera.
Zoom larger view with current speed.
Zoom further with current speed.
Stop zoom.
Zoom without stopping for larger view with current speed.
Zoom without stopping for further view with current speed.
The slope of movement = vy/vx, used for joystick control.
Set the speed of movement, "0" means stop.
VIVOTEK
User's Manual - 157