Viessmann VITOSOLIC 200 Installation And Service Instructions Manual page 161

Overview of system parameters
Options
Sys. options:
ΔT Fct6
Time switch 2
Thermost. 5
Thermost. 6
ΔT Fct7
Time switch 3
Reference sensors for the required functions can be determined in the following sub-
menu. All sensors that already have a function in the system are available for this.
The sensors are switched.
For a description of the function blocks, see page 112.
Contractor
Sys.contractor: Description
Sen. add.fct. Reference sensor for the
additional function for
DHW heating (see
page 136)
Sen.Th1 Reference sensor for ther-
mostat function 1, function
block 1
Sen.Th2 Reference sensor for ther-
mostat function 2, function
block 1
Sen1 ΔT5Fct Reference sensor for dif-
ferential temperature con-
trol, function block 1
Sen2 ΔT5Fct Reference sensor for dif-
ferential temperature con-
trol, function block 1
(cont.)
Description
ΔT6 differential tempera-
ture control, function
block 2
Time switch 2, function
block 2
Thermostat function 5,
function block 3
Thermostat function 6,
function block 3
ΔT7 differential tempera-
ture control, function
block 3
Time switch 3, function
block 3
Delivered
condition
No
No
No
No
No
No
Delivered Setting
condition range
2 1 to 12
3 1 to 12
4 1 to 12
3 1 to 12
4 1 to 12
Appendix
Set value
Set
value
161