Effect Libraries; Table 6.1: Common Effect Parameters - Tascam DM-4800 Owner's Manual

Use the cursor keys and
ENTER
from PRESET 1 (TC Works reverb),
effect) or any of the four memory banks on the CF
card.
Use the wheel or POD 4 encoder to scroll through
the entries and press the POD 3 switch to recall the
entry to the effect loop.
POD 1
INPUT type selection
(mono or stereo)
For more information on the TASCAM FX2.0/TC
Reverb parameters, visit our website.

Effect libraries

The effect libraries allow the storage and recall of
effects. They work in the same way as other libraries,
allowing you to name settings and store them to card
banks.
Refer to the TASCAM FX2.0/TC Reverb preset list
posted on our website.
to select an effect
PRESET 2 (TASCAM
POD 2
INPUT Sets the input level to
the effect

Table 6.1: Common effect parameters

6 – Effects : Effect libraries
Press the key once more to return to the set-
EFFECT
ting screen:
Figure 6.3: Effect setting
The exact screen depends on the effect selected, as
explained below, but the top row is common to all
effects, whether TASCAM or TC Works:
POD 3
MIX From dry (0%) to fully wet
(100%)
For guitar compressor,
distortion, compressor, exciter,
De-esser: Bypass — On or Off
Effects can be stored in any of the card banks, and
recalled to either of the effect slots.
See "Library management" on page 38 for details of
how libraries are operated.
TASCAM DM-4800 User's Manual
POD 4
OUTPUT output level
95