Tascam DM-4800 Owner's Manual page 129

9 – Specifications : Messages and troubleshooting
Action Message
✔
Format CF Card?
Press ENTER to confirm,
or a cursor key to cancel.
✔
Format failed.
Retry?
Press ENTER to confirm,
or a cursor key to cancel.
●
Formatting now.
Please do not turn off power
while formatting.
✖
Fs has changed.
Mixer will reboot.
Press ENTER to confirm
or a cursor key to cancel.
FS mode after loading and
✔
FS mode before loading is different.
Fs is switched and Reboot.
Press ALT+STOP+PLAY to reboot.
FS modes do not match.
✖
Cascade connection not established.
Press ENTER to continue.
✔
GATE Library BANK a-bbb
Name : TASCAM DATA
Create data: DEC/15/2004
20: 35: 45
Project Name: PROJECT ORCA
Project FS: 44.1kHz
Press ENTER to continue.
✔
GATE Library Preset a-bbb
Name : TASCAM DATA
Press ENTER to continue.
●
GATE Library
Bank a-bbb recalled.
✖
GATE Library
Preset 1-bbb is Read-only!
●
GATE Library
Preset a-bbb recalled.
●
Group x is not grouped.
✔
Grouping Link (Fader ->Mute)
Press ENTER to confirm,
or a cursor key to cancel.
✔
Grouping Link (Mute ->Fader)
Press ENTER to confirm,
or a cursor key to cancel.
●
HUI
DAW Control Emulator
optimized for ProTools
Press ENTER to continue.
✔
Invert source ?
Press ENTER to confirm,
or a cursor key to cancel.
✔
Invert source CHxx-CHxx?
Press ENTER to confirm,
or a cursor key to cancel.
●
Loading project.
Do not remove the CF card.
✖
Machine Control List Full
Press ENTER to c ntinue
Meaning
Confirmation before formatting a CF card.
A CF card format operation has failed.
Warning not to remove power while card is being formatted.
Notice to restart the DM-4800 following a change of sampling frequency.
A project has been loaded which has changed the sampling frequency.
Cascade master and slave must use the same sampling frequency.
Information about a library entry (gate).
Information about a library preset entry (gate).
A library entry has been recalled (gate).
An attempt has been made to store to a protected library entry (EQ).
A library preset entry has been recalled (gate).
A group does not exist to be used as a grouping layer.
Confirmation that fader groups should be linked to mute groups.
Confirmation that mute groups should be linked to fader groups.
Information on external control.
Confirmation when changing between Input and Return sources.
Confirmation when making a batch change between Input and Return sources.
Warning not to remove the card while a project is loading.
The Machine Control List is full and an item must be deleted.
Table 9.1: Popup messages (continued)
TASCAM DM-4800 User's Manual
129