Tascam DM-4800 Owner's Manual page 122

9 – Specifications : Messages and troubleshooting
Action Message
Automation Data is not modified,
✔
execute the KEEP?
Press ENTER to confirm,
or a cursor key to cancel.
●
Automation data was recalled.
●
Automation data was stored.
Automation memory is consumed 100%
✖
You cannot go on writing any more!
without slicing or erasing these data
PressENTERtocontinue.
Automation Memory is consumed 95%
Please Stop TC and
✖
Store Current Automation data,
Right Now
Press ENTER to continue.
●
Automation Redo executed.
●
Automation Undo executed.
✔
AUX 1-2 Level
Set up Ch parameters?
Press ENTER to confirm,
or a cursor key to cancel
✔
AUX1 Pan/Bal
Copy Aux1-2Level -> Ch Fader Level?
Press ENTER to confirm,
or a cursor key to cancel.
✔
AUX1 Pan/Bal
Copy Ch Pan/Bal -> Aux1-2 Pan/Bal?
Press ENTER to confirm,
or a cursor key to cancel
✔
AUX1-2 Level
Copy Aux 1-2Pan/Bal -> Ch Pan/Bal?
Press ENTER to confirm,
or a cursor key to cancel
✔
AUX1-2 Level
Copy Ch Fader Levels -> Aux1-2 Level?
Press ENTER to confirm,
or a cursor key to cancel.
✔
AUX1-2 to STEREO is assigned
Press ENTER to continue.
✔
AUX1 Level
Copy Ch Fader Level -> Aux 1 Level?
Press ENTER to confirm,
or a cursor key to cancel
✖
Battery is defective
Can't save system data.
Please contact TASCAM service.
Press ENTER to continue
Can't copy project
✔
The CF Card is full.
Press ENTER to continue
✖
Can't recall COMP/EXP Library
Bank a-bbb
✖
Can't recall COMP/EXP Library
Preset 1-bbb
122
TASCAM DM-4800 User's Manual
Meaning
Confirmation that you want to store (keep) unmodified automation data.
The selected automation data has been recalled into memory.
The current automation data has been stored to card.
The automation memory is completely full. Some automation data will have to be
erased.
The automation memory is getting full. Stop the timecode source, and store the
automation data.
An undo/redo operation has been successfully performed.
An undo/redo operation has been successfully performed.
Used when batch copying parameters from channel to Aux 1-2 settings.
Copying the AUX 1-2 pan and balance settings to the channels.
Copying the channel pan and balance levels to the Aux 1-2 pan and balance.
Copying the AUX 1-2 pan and balance settings to the channels.
Copying the channel fader levels to the Aux 1-2 levels.
In the master buss assignment, this message appears if an attempt is made to override
an existing assignment ("Routing & assignment" on page 58).
Copying the Aux 1-2 parameter settings to the channels.
The internal battery is defective, or has lost charge, so data can't be stored. Contact
TASCAM service or your distributor for a replacement battery.
An attempt has been made to copy a project on a full CF card.
The named compressor/expander library item cannot be recalled. The data may be
missing or corrupt.
The named compressor/expander library preset cannot be recalled. The data may not
exist or may be corrupt.
Table 9.1: Popup messages (continued)