Project ............6 Operation ............ 6 Factory Default Settings......6 Version 1.50 ..........6 Remote control ........... 6 TASCAM FX / TASCAM FX 2.0 ....6 TASCAN FX 2.0 ..........6 Version 1.10 ..........7 Project 7 Known Issues ......... 7 Version 1.60 ..........
If you are updating the firmware in a DM-4800 that is doing the firmware update procedure. cascaded, always disconnect the cascade cable before New Features This section describes the new features for each revision of the DM-4800 software. Version 1.50 User Defined Layer ª...
Figure 3 MIDI>SETUP screen Windows Vista ª This version of the DM-4800 is now fully supported by Windows Vista 32 bit and Vista 64 bit. It is possible to do remote control of DAW Applications that run under Windows Vista and transfer MIDI messages between the DAW software and the mixer.
MUTE controlled. This allows MIDI devices to be controlled in synchroniza- tion with operations on the DM-4800 mixer, or conversely Figure 9 MIDI>SETUP screen for mixer parameters to be controlled from a MIDI device. Until now, the input/output on/off setting for USB MIDI port In the .
DM-4800 Release Notes Maintenance Items This section describes the Maintenance items for each revision of the DM-4800 software. Version 1.60 Option Slot Cards The operation of the Shuttle and controls using the • ª MMC protocol has been improved. At 88.2 kHz or 96 kHz sampling rates, some master •...
Known Issues This section describes the Known Issues for the latest DM-4800 software Version 1.60 Multiple IF-AE/DM cards and clock master. DTRS REC FUNCTION setting when con- ª...