Tascam DM-4800 Owner's Manual page 125

9 – Specifications : Messages and troubleshooting
Action Message
✖
CF card is not available
Press ENTER to continue.
✔
CH DELAY Time
Update setup?
Press ENTER to confirm,
or a cursor key to cancel
✔
CH Module LFE LEVEL
Ch parameters setup?
Press ENTER to confirm,
or a cursor key to cancel
✔
CH Module PAN/BAL
Ch parameters setup?
Press ENTER to confirm,
or a cursor key to cancel
●
CH1 COMP/EXP Library redo completed.
●
CH1 COMP/EXP Library undo completed.
●
CH1 EQ Library redo completed.
●
CH1 EQ Library undo completed.
●
CH1 GATE Library redo completed.
●
CH1 GATE Library undo completed.
●
Ch1xx
EQ Library undo completed.
●
Chxx
COMP/EXP Library redo completed
●
Chxx
COMP/EXP Library undo completed
●
Chxx
EQ Library redo completed
●
Chxx
GATE Library redo completed
●
Chxx
GATE Library undo completed
✔
Clear all fader grouping layers?
Press ENTER to confirm,
or a cursor key to cancel.
Clear Current Automation ALL data?
✔
Press ENTER to confirm,
or a cursor key to cancel.
Clear Current Automation Event Data?
✔
Press ENTER to confirm,
or a cursor key to cancel.
✔
Clear this fader grouping?
Press ENTER to confirm,
or a cursor key to cancel.
Meaning
An attempt has been made to read or write to a CF card that is not inserted, etc. Reinsert
the card or retry with another card.
Shown when performing bulk setup of the channel delay time.
Shown when performing bulk setup of the channel LFE level.
Shown when performing bulk setup of the channel pan and balance parameters.
The undo/redo operation is now complete.
The undo/redo operation is now complete.
The undo/redo operation is now complete.
The undo/redo operation is now complete.
The undo/redo operation is now complete.
The undo/redo operation is now complete.
Shown when undoing or redoing library operations.
Shown when undoing or redoing library operations.
Shown when undoing or redoing library operations.
Shown when undoing or redoing library operations.
Shown when undoing or redoing library operations.
Shown when undoing or redoing library operations.
Shown when all grouping layers are to be cleared.
Confirmation when starting a new automation project – all current automation data will
be cleared.
When setting up automation, this message appears to confirm the clearing of all current
data.
Shown when the currently selected fader grouping is to be cleared.
Table 9.1: Popup messages (continued)
TASCAM DM-4800 User's Manual
125