Auto detection of MMC control target ... 25 MIDI mixer ..........15 Updating the firmware on a cascaded Changing the assignment ......15 mixer ............. 25 Assigning parameters to rotary encoders ..16 USB Connection notes ......25 Cascade connection ......16 TASCAM DM-3200 Release Notes V1.50...
The transport keys can be locked to protect from pressing them accidentally by pressing SHIFT STOP New Features This section discribes the new features for each revision of the DM-3200 software. New Features in V 1.50 User Defined Layer It is now possible to create a user-defined layer that freely combines the DM-3200’s modules.
-> METER key Follows Fader Layer Status” and “Meter Follows SEL key” on the OPTION -> PREFERNCE screen, the meter bridge will follow when you change to the REMOTE Fader Layer. Figure 3 MIDI>SETUP screen TASCAM DM-3200 Release Notes V1.50...
DSP units of the DM3200 for use. pitch shifter, and numerous presets are provided. Both of the two units can use TASCAM FX 2.0 effects For details on each type and on the preset library, refer to simultaneously.
Figure 5 Example screen for Logic control Windows Vista This version of the DM-3200 is now fully supported by Windows Vista 32 bit and Vista 64 bit. New Features in V1.30 IF-FW MKII support When the separately sold IF-FW/DM MKII option card is...
This allows MIDI devices to be controlled in synchroniza- v1: Major version number of firmware tion with operations on the DM-3200 mixer, or conversely v2: Minor version number of firmware for mixer parameters to be controlled from a MIDI device.
You can now use P2 protocol to control the transport of the X-48. In the supported devices area of the REMOTE>MACHINE screen, choose CTRL MM/MX-24/X-48 Figure 13 REMOTE>MACHINE CTRL screen You can specify as the REC Function. 1-48 TASCAM DM-3200 Release Notes V1.50...
Cascade connection Integrated surround monitoring can be added to the DM-3200 by installing an IF-SM/DM surround monitor A cascade connection can be made between two DM-3200 units. card (sold separately). An IF-SM/DM card can be installed into either Slot 1 or 2.
IF-SM/DM card. Figure 1: SLOT screen when an IF-FW/DM and an IF-SM/DMare installed Naming the mixer DM-3200 Ver1.20 allows you to set and edit mixer names A pop-up window will appear for editing the mixer so that you can easily differentiate between multiple name. mixers with the TASCAM Mixer Companion computer application.
DM-3200 Owner’s Manual. As a result of this additional ID of 0 to match the ‘1’ on the DM-3200, for example. The function, the following information is added to “Table 8.3: all-call ID number, 127 in the MMC protocol, is not used Supported transport machine control devices”...
DM-3200 to the MIDI device. MIDI OUT Setting devices for MIDI control Setting of the MIDI control setup is carried out on the channel of the device being controlled by the DM-3200. REMOTE>EXT.CTRL screen. If the device is a...
MIDI CONTROLLERS Figure 8: MIDI CONTROLLERS screen MIDI fader Using the DM-3200 faders, you can send MIDI Control As shown in figure 9, you can select and set the MIDI Change messages to all 16 MIDI channels of an external Control Change number on this screen.
POD 3 key (or keep pressing the MIDI key), or move MUTE key of the DM-3200. In the default setting, they the cursor to the ) button at the top Jump to SCREEN control , and respectively.
EDIT section. TARGET SELECT Cascade connection DM-3200 Ver1.20 allows you to make a cascade connection between two DM-3200 units. Cascade connection overview • Two DM-3200 units that are connected by a cascade Timecode is shared to synchronize the two units.
DM-3200s that are running Version 1.20. 1 Using the TASCAM cascade cable (PW-1000CS – sold separately), connect the CASCADE ports of the two DM-3200. WARNING Only use the special TASCAM cascade cable. Use of any other type of cable may result in damage to the equipment. 2 Set one of the DM-3200 units to be the cascade master, and the other the cascade slave. To set the master and slave, display the...
GPI functionality DM-3200 Ver1.20 supports GPI functionality. This allows The DM-3200 allows you to give different trigger settings you to send 8 output signals from the GPI port (D sub to each of the GPI ports for GPI signal output. You can...
TIME EVENT , it will always display 3 Press the ENTER key to confirm the setting. and the ON/OFF setting will be governed by the setting in the on the right of the screen. GPI EVENT LIST TASCAM DM-3200 Release Notes V1.50...
: output high pulse at the designated time : change to low level at the designated time : change to high level at the designated time ON/OFF setting Set this to when you want to activate the settings of individual GPI ports. TASCAM DM-3200 Release Notes V1.50...
DM-3200 to-buss assignment” on page 51 and “Assigning channels (please see “Automated Controls” on the page 4 of the to surround busses” on page 75 of the DM-3200 Owner’s DM-3200 Automation Guide). Manual).
DM-3200 Release Notes New feature in V 1.10 • 1.10 of the DM-3200 Operating system provides DAW remote control functionality using the Fader REMOTE Layer. Support has been added for DigiDesign Pro Tools, Cakewalk SONAR, MOTU Digital Performer, Steinberg’s Nuendo & Cubase and Apple Logic Pro.
DM-3200 Release Notes Maintenance Items This sectiondescribes the Maintenance items for each revision of the DM-3200 software. Maintenance Items in V1.50 V1.50 Remote control Previously, the LCD would unexpectedly switch focus This has been fixed. when both MIDI Faders and the DAW Control Surface feature was being used and the master fader touched.
Pink noise generated by the oscillator is now more accurate • Rare instances of not being able to exit Initial Edit after writing automation have been addressed • Rare instances of over-writing protected CTRL STORE data have been addressed TASCAM DM-3200 Release Notes V1.50...
DM-3200 Release Notes Known Issues This section describes the Known Issues for the latest DM-3200 software Known Issues in V1.50 DTRS REC FUNCTION setting when controlling via P2 When making REC function settings with multiple DTRS devices connected, and the REC function of track 9 or later is operated from the DTRS unit, that status is not reflected in the mixer.