Effect Parameter List; Tascam Fx2.0 Effect Parameters; Mono Chorus Fx2.0 - Tascam DM-4800 Manual

Digital mixing console
Hide thumbs Also See for DM-4800:
Table of Contents

Advertisement

Effect Parameter List

TASCAM FX2.0 Effect Parameters

MONO CHORUS FX2.0

This chorus effect features mono-in (one input) and
stereo-out (two outputs).
Parameter
Indicator
LFO rate
LFO Rate
LFO depth
LFO Depth
Pre-delay
Pre-Delay
Feedback
Feedback
amount
Amt
Feedback
InvertFbk
inversion
LFO waveform
LFO Type
type
LFO softening
LFO Smooth
Dry delay
DryDly
(Thru 0)
Low shelving
LoShelfFreq
filter frequency
Low shelving
LoShelfGain
filter gain
High shelving
HiShelfFreq
filter frequency
High shelving
HiShelfGain
filter gain
Table 1.1: Mono Chorus parameters
Range
Freeze, 0.01 Hz - 30.00 Hz (0.01 Hz steps)
0.0% - 100.0% (0.1% steps)
0 ms - 500 ms
(0 ms - 9.99 ms: 0.01 ms steps;
10 ms - 99 ms: 1 ms steps;
100 ms - 500 ms: 10 ms steps)
0% - 90% (1% steps)
Off, On
Off, Sine, Triangle, Sawtooth Up, Sawtooth
Down, Square
0.0% - 100.0% (0.1% steps)
0.0% - 100.0% (0.1% steps)
20.000 Hz - 20.00 kHz (6 cents steps)
–20.0 dB - 0.0 dB (0.1 dB steps)
20.000 Hz - 20.00 kHz (6 cents steps)
–20.0 dB - 0.0 dB (0.1 dB steps)
Effect parameter list
Description
Specifies LFO frequency.
Specifies LFO modula -
tion depth.
Specifies time between
Using this parameter
onset of original sound
enables you to make
and onset of the effect
interesting and detailed
sound.
settings based on subtle
changes due to phase
cancellation.
Specifies amount of
delay line output signal
returned to delay line
input.
Determines whether
or not feedback path
output signal will be
inverted.
Specifies LFO waveform
type.
Specifies low-pass filter
This parameter improves
coefficient applied to
unnatural sound at
LFO waveform.
discontinuous points by
smoothening out edges
of sawtooth or square
waveform.
Specifies delay of dry
signal that simulates
" through zero" flanging.
Specifies low shelving
This filter is applied to
filter corner frequency.
feedback loops.
Specifies low shelving
This filter is applied to
filter gain.
feedback loops.
Specifies high shelving
This filter is applied to
filter corner frequency.
feedback loops.
Specifies high shelving
This filter is applied to
filter gain.
feedback loops.
TASCAM DM-4800 Effect list
Remarks


Advertisement

Table of Contents
loading

Table of Contents