Power Sensor - Schwinn A.C. Classic Service Manual

Power Sensor

Problem: Power does not show up on the console (displayed as "---").
Solution:
1. Solution 1: The power sensor may be in sleep mode. To wake up the power sensor start pedaling the bike for 10-20s; the
vibrations of the chain and crank movement should be enough to turn on the sensor. If the displayed power still does not show
up tilt the bike over to one side for 5-10s
2. Solution 2: The power sensor may not be paired with the speed sensor; this will result in transmission of 0 watts at all times
with the console flashing "---" and the power sensor eventually will go back into sleep mode. Follow the pairing procedure
described in the owners manual.
3. Solution 3: Reset the power sensor by removing and reinstalling the battery.
4. Solution 4: The battery is dead; replace the battery with a new battery.
5. Solution 5: The speed sensor may not be detected; in which case the power sensor will go into sleep mode. Ensure that the
speed sensor is functioning correctly.
6. Solution 6: If the above 5 solutions do not fix the problem, replace the power sensor. Please take note that upon power sensor
replacement the console and speed sensor will need to be re-paired to the new power sensor.
Problem: Displayed power does not increase with brake movement but does change with RPM.
Solution:
1. The power sensor has more than likely not been full-up calibrated. Follow the full-up calibration procedure in the owner's manual.
2. Reset the power sensor by removing and reinstalling the battery.
3. If the above 2 solutions do not fix the problem, replace the power sensor. Please take note that upon power sensor replacement
the console and speed sensor will need to be re-paired to the new power sensor.
Problem: LEDs do not turn on (or are very dim) when the pairing button is pressed.
Solution:
1. Reset the power sensor by removing and reinstalling the battery.
2. The battery is dead; replace the battery with a new battery.
3. If the above 2 solutions do not fix the problem, replace the power sensor. Please take note that upon power sensor replacement the console and
speed sensor will need to be re-paired to the new power sensor.
12