Console - Schwinn A.C. Classic Service Manual

Console

(Make sure console is updated to the latest firmware version)
Console does not turn ON.
Problem:
Solution:
1. Press any of the three buttons and see if console turns ON.
2. Change batteries.
3. Replace Console.
USB does not work / save data.
Problem:
Solution:
1. Check the settings in Service Menu (refer to Owners manual) and make sure USB is enabled.
2. Change batteries.
3. Replace Console.
Cannot start pairing menu when pairing button is pressed.
Problem:
Solution:
1. Turn ON the console first by pressing any button. If the console workout timer has not started, press the pairing button to go to
pairing menu (PPP).
2. Restart the console by taking out the batteries and putting them back in.
3. Erase EEPROM from Service Menu EP- sub menu.
4. Replace Console.
Backlight does not turn ON.
Problem:
Solution:
1. Check the backlight option in the Service Menu and make sure it's not turned OFF.
2. Replace batteries.
3. Replace Console.
Cannot update the firmware . Tried updating the firmware and Console does not turn on or has no display.
Problem:
Solution:
1. Replace batteries and retry firmware upgrade.
2. Use an empty USB stick (1 GB or less), and download the latest firmware version. Firmware version needs to be named as
FB602.hex
3. Replace the console and try upgrading it.
Troubleshooting
10