1) When the SPECIAL menu screen is displayed, press the Function
Setup switch so that the arrow indicates 'PRIVACY'.
2) Set up the mode using the Function Setup switch.
- AREA : You can select up to 12 PRIVACY areas.
- MODE : Determines whether to use the area selected in the AREA.
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray.
- MASK TONE : Adjust the brightness of MASK COLOR.
- TOP/BOTTOM/LEFT/RIGHT :Adjust the size and position of the selected area.
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.
Automatic Thermostatic Sensor!
1. Power off under -40 degree, the camera becomes frozen
2. On power on, the first temperature sensor starts working and makes heater work.
3. When the internal temperature in camera goes up to -10 degree,
the second temperature sensor starts working and Camera on.
In this status the first and second temperature sensor work together.
4. When the internal temperature in camera goes up to +10 degree,
the first temperature sensor turns off and the only second temperature
sensor keeps working.
RETURN Setting
●
Select a desired RETURN mode using the Function Setup Switch.
- SAVE : Save the current settings and RETURN the MAIN SETUP menu.
- NOT SAVE : Do not save the current settings and RETURN the MAIN SETUP menu.
- RESET : Resets the camera settings to the factory defaults. Language,
Communication and Monitor Settings are not initialized.
24