SIIG CyberParallel Dual Quick Installation Manual page 7

2. Insert the driver CD, check Include this location in
the search, uncheck the other box, type in
X:\2P\2003, then click Next. (Change X: to match
your CD-ROM drive letter)
3. At the Hardware Installation window, click
Continue Anyway, then click Finish. Our driver has
been thoroughly tested for stability and compatibility.
4. Repeat steps 1-3 two more times.
5. Restart your system for the new setup to take effect.
DOS Driver Installation
1. Insert the driver CD. From the C:\> prompt, type
copy X:\2P\dos\*.*, and press <Enter>. (Change
X: to match your CD-ROM drive letter)
2. Type edit autoexec.bat, and press <Enter>.
3. Add C:\nmdosin.exe -a at the bottom of the
autoexec.bat file.
4. Go to File, save the changes and exit.
5. Restart your system for the new setup to take effect.
Verify Proper Windows Driver Installation
For Windows 95/98/98SE/ME:
1. Right click My Computer, click Properties, click
Device Manager.
2. Double click NetMosMultiFunction, NetMos
PCI...Controller should be listed.
3. Double click Ports (COM & LPT), two NetMos PCI
Parallel Ports should be listed.
7