SIIG CyberParallel Dual Quick Installation Manual page 6

Windows 2000 Driver Installation
1. At the Found New Hardware Wizard, click Next.
2. Select Search for a suitable driver for my device
(Recommended), then click Next.
3. Select Specify the location, uncheck the other boxes,
then click Next.
4. Insert the driver CD, type in X:\2P\2000, then click
OK. (Change X: to match your CD-ROM drive
letter)
5. Click Next, then click Finish to complete the driver
installation.
Windows XP Driver Installation
1. At the Found New Hardware Wizard, choose Install
from a list or specific location (Advanced), then
click Next.
2. Insert the driver CD, check Include this location in
the search, uncheck the other box, type in X:\2P\XP,
then click Next. (Change X: to match your CD-ROM
drive letter)
3. At the Hardware Installation window, click
Continue Anyway, then click Finish. Our driver has
been thoroughly tested for stability and compatibility.
4. Repeat steps 1-3 two more times.
5. Restart your system for the new setup to take effect.
Windows Server 2003 Driver Installation
1. At the Found New Hardware Wizard, choose Install
from a list or specific location (Advanced), then
click Next.
6