Table of Contents
Advertisement
System Status Page
Viewing Device parameters
1.
Select System Status from the menu on the left side of the RMS application.
2.
Expand the group name containing the status you want to check.
3.
Select the room name to view the device information page.
4.
Click View for the selected parameter in the Device List Monitored Parameters section. The Device
Parameter page opens.
Viewing Device Parameter history
1.
Select System Status from the menu on the left side of the RMS application.
2.
Expand the group name containing the status you want to check.
3.
Select the room name to view the device information page.
4.
Click View for the selected parameter in the Device List Monitored Parameters section. The Device
Parameter page opens.
5.
Click History to launch the The Device Parameter History page.
Deleting Device Parameter history
1.
Select System Status from the menu on the left side of the RMS application.
2.
Expand the group name containing the status you want to check.
3.
Select the room name to view the device information page.
4.
Click View for the selected parameter in the Device List Monitored Parameters section. The Device
Parameter page opens.
5.
Click History to open the Device Parameter History page.
6.
Click Delete.
Modifying Device Parameters
1.
Select System Status from the menu on the left side of the RMS application.
2.
Expand the group name containing the status you want to check.
3.
Select the room name to view the device information page.
4.
Click View for the selected parameter in the Device List Monitored Parameters section. The Device
Parameter page opens.
5.
Click Modify. The Modify Parameter page opens.
6.
Edit any of the following:
7.
Click Reset to reset the parameter.
8.
Click Save to save.
Deleting Device Parameters
1.
Select System Status from the menu on the left side of the RMS application.
2.
Expand the group name containing the status you want to check.
3.
Select the room name to view the device information page.
4.
Click View for the selected parameter in the Device List Monitored Parameters section. The Device
Parameter page opens.
5.
Click Delete.
78
Select the Threshold Operator from the drop-down combo box.
Edit the threshold value in the field Threshold (in).
Set the Status Type in the drop-down combo box.
Set an Alert Template from the drop-down combo box.
Enable or disable the option Advise when parameter returns to normal range. If you enable this
option, set the Advise Template from the drop-down combo box.
RMS - Administrator's Guide
Advertisement
Table of Contents
