Configuring Connection Settings - AMX RMS Administrator's Manual

Database Wizard
The Database Wizard tests to ensure that the update script can be applied to the existing configured database. It
also ensures that the update script has not already been applied to the database. If these tests are passed, you
are prompted with the Ready To Update message. If the update script does not pass these tests, an error
message is displayed and you are not able to apply the update script.
Click Next to continue.
After the database script has been applied successfully, click Next to continue.
The Database Wizard performs a database connection test and then returns to the main menu.

Configuring Connection Settings

You can use the Database Wizard at anytime to configure the RMS application database connection settings.
The RMS application uses a DSN-less connection, and thus stores all the database connection settings
internally.
Database Server:
Use Windows Authentication
Use SQL Server Authentication
Database Name:
FIG. 55 Database Connection Settings
After configuring the RMS application database connection settings, the Database Wizard performs a database
connection test and then returns to the main menu.
56
Enter the database server IP address or hostname.
Enable Windows Authentication or,
Username:
Enter the database username (if needed).
Password:
Enter the database password (if needed).
Enter the database file name.
RMS - Administrator's Guide