AMX RMS Administrator's Manual page 176

Configuration Page
Configure Notification Template (Cont.)
• Default
Template
• Insertable
Items
• Date/Time
• Device
• Formatting
• Parameter
164
When enabled, this is the default setting and format for your notifications.
Each template can contain placeholders that are replaced with data specific to the event when
the notification is generated. For instance, if the template contains [Room.Name], this tag is
replaced with the name of the room that caused the notification to be sent.
• [DATE] - Short Date in localized format. In US, it would be "mm/d/yy" e.g. "10/3/06"
• [LONGDATE] - Long Date in localized format. In US, it would be "month day, yyyy" i.e.
"October 3, 2006"
• [Room.Time] - Current localized room time. This is calculated based on the timezone the
room is configured for. e.g. "12:05 AM"
• [Room.TimeZoneName] - The timezone for the room
• [Server.Time] - Current localized server time, e.g. "12:05 AM"
• [Server.UTC] - Current localized server time in UTC, e.g. "6:05 AM"
• [TIME] - Current localized time, e.g. "12:05 AM"
Device that contains the parameter change that invoked the notification
• [Device.Description] - Device textual description
• [Device.DPS] - Device:Port:System identifier
• [Device.Manufacturer] - Device manufacturer name
• [Device.Model] - Device model name/number
• [Device.Name] - Device name
• [Device.NetLinxDeviceAddress] - NetLinx device address
• [Device.NetLinxDeviceAddressType] - NetLinx device address type, e.g. "RS-232" , "TCP/IP"
, "AXLINK" or "ICSNET"
• [Device.NetLinxDeviceSerialNumber] - The serial number for the NetLinx device
• [Device.NetLinxDeviceType] - The NetLinx device type name. e.g. "Volume Control" or "NI
Master"
• [Device.NetLinxDeviceVersion] - The version of the NetLinx device
• [Device.RFIDTagID] - The RFID Tag of the device
• [Device.SerialNumber] - Device serial number
• [CRLF] - Carriage Return & Line Feed ( 0x0D, 0x0A )
• [TAB] - Tab ( 0x09 )
Parameter change that invoked the notification
• [Parameter.LastUpdate] - The UTC time the parameter was last updated
• [Parameter.Name] - The parameter textual name
• [Parameter.OriginalValue] - The original parameter value before the parameter change
• [Parameter.ParameterType] - The parameter type, e.g. "Number" or "String"
• [Parameter.StatusType] - The parameter's status type. e.g. "Help Request" or "Control
System Error"
• [Parameter.Threshold] - The parameter's threshold value, the value that will be compared
against to determine if the parameter change has tripped the parameter
• [Parameter.ThresholdCompare] - The parameters threshold comparison expression that is
used to determine if the parameter change has tripped the parameter
• [Parameter.Units] - The units of measure for the parameter, e.g. "hours", "minutes" etc.
• [Parameter.UpdateValue] - The update value of the last parameter change
• [Parameter.Value] - The current value of the parameter after the parameter change has been
applied
RMS - Administrator's Guide