Table of Contents
Advertisement
i!-PCLink/PowerPoint
FIG. 14
Include Slide Animations in Show Progress Graph:
If this option is checked, i!-PCLink/PowerPoint will include slide animation steps on each
slide as part of the slide total progress calculation which appears on the show progress bar
graph on the touch panel.
Enable i!-PCLink/PresentationControl Support:
If this option is checked, i!-PCLink/PowerPoint will support Microsoft PowerPoint
presentations that include i!-PCLink/PresentationControl.
Include Slide Animations in Show Progress Graph must also be enabled to support i!-
PCLink/PresentationControl.
Device section
The Device section shows information for the device, port and system; the i!-PCLink/PowerPoint
device will assume this information when connected to a NetLinx master. This device must be
unique on the system.
The default range is 8001 - 8999 and the default value is 8001; the value used here must match the
device number used in your NetLinx program. The port and system boxes are read only. The port
value will always be 1 and the system box will assume the system value of the NetLinx master that
i!-PCLink/PowerPoint connects to.
i!-PCLinkPowerPoint
Icon
Running i!-PCLink/PowerPoint
11
Advertisement
Table of Contents
