System Settings - Syslog - AMX RMS Administrator's Manual

System Settings - Syslog

SYSLOG logging can also be used to log messages. You need to supply the Syslog Server IP Address or
hostname and the Syslog IP Port to enable communication in the SYSLOG Options screen (FIG. 36).
The default SYSLOG IP port is 514 and does not need to be changed unless you have a custom Syslog
configuration.
FIG. 36 RMS Configuration Wizard - SYSLOG Options
SYSLOG Options
• Enable SYSLOG
Messaging
• Syslog Server
Address/Port
• Syslog Facility ID Select the facility from the drop down list.
• Test Message
Severity
• Test Message
You can test SYSLOG messages by setting some sample text in the Test Message Severity field, and clicking
the Test button.
Click Next to continue.
RMS - Administrator's Guide
Select the Enable SYSLOG Messaging to enable Syslog messages.
Enter the IP address or host name for the Syslog server.
Enter the IP port for the Syslog server.
Select from the drop-down list the message level severity.
Text field for the message to be sent.
RMS Configuration Wizard
41