System Settings - Snmp - AMX RMS Administrator's Manual

RMS Configuration Wizard

System Settings - SNMP

SNMP is the network management protocol used almost exclusively in TCP/IP networks. SNMP provides a
means to monitor rooms, systems, and devices in the RMS system.
Enter all the appropriate SNMP settings in the SNMP Services screen (FIG. 33).
FIG. 33 RMS Configuration Wizard - SNMP Service
SNMP Settings
• Enable RMS SNMP
Services
• SNMP Agent Port
(161 default)
• SNMP Community
• SNMP Trap
Community
• SNMP Trap
Recipients
• Add
• Remove
38
Place a check in the box to enable SNMP Services.
Type the port number to use for SNMP.
The group to which devices and management stations running SNMP belong.
This field is usually a "friendly" name.
An alert that is sent to a management station by agents.
This field is usually a "friendly" name.
The name or IP address of hosts to which traps are to be sent.
This is the management station, either a DNS name or IP address.
Adds a new recipient.
Removes selected recipient.
RMS - Administrator's Guide