Table of Contents
Advertisement
System Status Page
Overview
The System Status Page allows you to view the status of all rooms on a single screen (FIG. 62).
FIG. 62
System Status Page
Each room entry lists the Room Name, Room Power Status, Help Request, Room Communication Error,
System Error, Maintenance Issues, Network Errors, and Security Errors.
System Status
• Room Name
• Power
• Help Request The Help Request status for this room.
• Comm Error
• System Error
• Maintenance
• Network
• Security
Rooms are displayed in a tree view of groups and rooms. By default, all groups are rolled up unless an error
has occurred. In that case, the group containing errors is unrolled. Show Triggered redraws using the default
view. Expand all unrolls all groups. Collapse all rolls up all groups. Refresh refreshes this page.
The Room Power Status field will display a green power icon when the room power is on. Under normal
operating conditions, this page will display the power status for all rooms with a green check in all error
columns. If an error does occur the System Status page will display a red X for the room with the error.
Additionally, the error will appear as an item in the Hot List.
Auto-Refresh
The System Status Page and the View Devices Page (FIG. 63 on page 68) auto refresh every 30 seconds by
default.
Viewing System Status Information
To access the System Status page:
1.
Select System Status in the menu on the left side of the RMS application.
2.
Any rooms containing a parameter needing attention are expanded for viewing.
RMS - Administrator's Guide
The room name for this row.
A link to the View Room Settings page for a room. This link provides access to a detailed list
of all devices and device parameters for a given room. To investigate more thoroughly, click
on this link.
The Room Power status for this room.
The Room Communication Status for this room.
The Control System status for this room and its devices.
The Maintenance Request status for this room and its devices.
The Network status for this room and its devices.
The Security status for this room and its devices.
You can turn on/off the auto refresh by Setting ForcePageRefresh to true/false in web.config file.
You can also set how often you want the page refresh by changing PageRefresh in web.config file.
System Status Page
67
Advertisement
Table of Contents
