AMX AXB-F117 Stealth 1 Instruction Manual page 39

AXB-F117 Stealth 1 Camera Controller
Send_Commands (Cont.)
Command
'G<output 3-4>L<position 0-255
or 0-65535>'
'G<output 1-4>D<deviation 0-
127>'
'G<output 1-4>A<distance 0-
127>S<speed 0-127>'
Description
Turn on the specified output at the current
speed until the specified position as read by
the POT input is reached. Command forces
output to go to a preset position using the
POT input as a reference. (Positions 0-
65,535 are available using the 'AD MODE x
10' command.) This command can be used
for motor-mode and servomotor speed-mode
applications.
Example:
SEND_COMMAND CAM,'G3L100'
Sets ZOOM to search for position 100 as
referenced by the ZOOM POT input.
Set the current maximum position deviation
for future position ('GxLxxx') commands. This
command can be used for motor-mode and
servomotor speed/positional-mode
applications.
Example:
SEND_COMMAND CAM,'G1D4'
Sets PAN deviation to 4 for future 'G1Lxxx'
commands. Output will stop when it is within 4
of the specified position.
Set the output to slow down within the
specified distance of the specified position for
future 'GxLxxx' commands. This command
can be used for motor-mode and servomotor
speed-mode applications.
Example:
SEND_COMMAND CAM,'G1A5520'
Sets PAN to speed 20 when within 5 of the
specified position for future 'GxLxxx'
commands.
AXCESS Programming 35