Appendix C – Virtual NetLinx Master
To set a PC to Static IP Mode:
1.
From the Start menu on the desktop taskbar, select Settings / Network Connections.
2.
Right-click the Local Area Connection and select Properties.
The Local Area Connection Properties dialog box opens.
3.
From the list of "This connection uses the following items," select Internet Protocol (TCP/IP) and
click Properties.
The Internet Protocol (TCP/IP) Properties dialog box opens.
4.
Select "Use the following IP address."
122
Internet Protocol Properties dialog box
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver