AMX DXLink Instruction Manual page 120

Dxlink twisted pair transmitters/receiver dxlink multi-format wallplate transmitter dxlink multi-format decor style wallplate transmitter (us) dxlink multi-format transmitter module dxlink hdmi transmitter module dxlink hdmi receiver module
Hide thumbs Also See for DXLink:
Table of Contents

Advertisement

Appendix B – Telnet (Terminal) Commands
Telnet Commands (continued)
DIPSWITCH
SEND_COMMAND
[D:P:S,"'command'"]
EXIT
FACTORYFWIMAGE
GET CONFIG
GET CONNECTION
GET DEVICE
GET DNS
114
Displays the current value for each of the DIP switch's four toggles.
Example:
>dipswitch
Dipswitch - ON OFF OFF OFF
>
Sends the specified SEND_COMMAND (does not work with queries) to the current
DXLink Transmitter or Receiver.
Note: P (Port) number must be 1; S (System) number must be 0 (zero).
Note: Commands cannot be forwarded to other D:P:S, and asynchronous
notifications are not available via Telnet.
Example:
send_command 6501:1:0,"'VIDIN_AUTO_SELECT-ENABLE'"
Exit the Telnet session
Resets unit to factory firmware image and reboots DXLink Transmitter or Receiver.
Displays the current connection settings.
Example:
>get config
Device number: 32001
Connection Settings
--------------------------------
Mode:
UDP URL
System Number:
1
Master IP/URL:
192.168.44.53
Master Port:
1319
Username:
Password:
IP Settings
--------------------------------
HostName:
localhost
Type:
DHCP
IP Address:
192.168.44.86
Subnet Mask:
255.255.255.0
Gateway IP:
192.168.44.2
MAC Address:
00:0f:3c:00:55:04
DNS Servers
--------------------------------
Domain suffix:
amx.internal
Entry 1:
192.168.40.7
Entry 2:
192.168.40.8
Note: The system number and IP addressing information displayed is reflective
of actual operating values, not stored parameters.
Shows the Master connection information.
Example:
>get connection
Connection Settings
------------------------------
Mode:
UDP URL
System Number:
1
Master IP/URL:
192.168.44.53
Master Port:
1319
Username:
Password:
Displays the device number.
Gets the list of DNS entries.
Example:
>get dns
DNS Servers
-------------------------------
Domain suffix:
amx.internal
Entry 1:
192.168.40.7
Entry 2:
192.168.40.8
Note: When the DXLink Transmitter or Receiver is in DHCP Mode, these are active
values, NOT the stored values that only apply to Static IP Mode.
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents