Installing The At-Rps2001 Unit; Figure 43 At-Rps2001 Redundant Power Supply - Allied Telesis AT-8350GB Installation Manual

Installing the
AT-RPS2001
Unit
Perform the following procedure to install the optional AT-RPS2001
external power supply unit onto the switch.
1. Unpack the AT-RPS2001 power supply from its shipping container
and store the packaging material in a safe location.

Figure 43 AT-RPS2001 Redundant Power Supply

Note
You must use the original shipping material if you need to return
the module to Allied Telesyn.
2. Check that the package includes all the items listed below. If any item
is missing or damaged, contact your Allied Telesyn sales
representative for assistance.
One RPS2001 Redundant Power Supply
Power cord (Americas, EC, Australia, and UK only)
Installation Guide
Warranty card
AT-8350GB Installation Guide
71