Advanced Operations
Custom Setup
You can perform custom settings using SETUP on the
remote controller or the integrated amplifier. The SETUP
menu allows you to set the following items: NAME,
SHOW, HPLVL, ASb, ROUTE, and RESET.
CD SACD MD TAPE TUNER
NAME
DOCK PC GAME TV
L1 L2 L3 CX1 CX2 OPT
SHOW
PNO USB AES
HPLVL
HP -12 HP 0 HP +12
ASb
ASb-ON ASb-OFF
NORMAL PRE
ROUTE
MAIN SPLIT
RESET
RST-NO RST-YES
Note
• When "ROUTE" is set to "MAIN", the "NAME", "SHOW",
"HPLVL" and "ASb" settings are not available.
• When the "USB" or "PHONO" input is selected, "NAME"
setting is not available.
Changing Input Names
You can change the name of the currently selected input.
Choose a name from the following: CD, SACD, MD,
TAPE, TUNER, TV, GAME, PC, DOCK
En
36
■ Operating with the remote controller
ENTER
RETURN
SETUP
1
Press SETUP.
2
Press
/
repeatedly to select "NAME".
3
Press ENTER.
The name currently assigned to the input flashes.
4
Press
/
repeatedly to select the name you want
to assign.
The selected name flashes.
5
Press ENTER.
The selected name flashes rapidly for a few times as
the setting is confirmed.
6
Press RETURN repeatedly to exit the setup.
■ Operating on the integrated amplifier
/
/ /
1
Press SETUP repeatedly to select "NAME".
2
Use the INPUT selector to select the name you want
to assign.
First, the currently assigned name flashes on the
information display. Then, the assignable names are
displayed flashing.
3
Press and hold down SETUP.
The selected name flashes rapidly for a few times as
the setting is confirmed.
4
Press SETUP repeatedly to exit the setup.
Tip
• By default, input names are set according to the terminal names.
Note
• If you assign a name that is already used on another input, the
name of that other input will be restored to its default.
• When the "USB" or "PHONO" input is selected, "NAME"
setting is not available.
• The integrated amplifier will end the setup if there is no
operation for 8 seconds.
SETUP
INPUT selector