Specifications - Onkyo A-9000R Instruction Manual

Specifications

Rated Output Power
(Stereo):
*
Dynamic Power
* IEC60268-Short-term maximum output power
THD+N (Total Harmonic Distortion+Noise)
Damping Factor
Input Sensitivity and Impedance (Unbalance)
Rated RCA Output Level and Impedance
Maximum RCA Output Level and Impedance
Phono Overload
Frequency Response
Tone Control Characteristics
Signal to Noise Ratio
Speaker Impedance
HICC
Power Supply
Power Consumption
No-sound Power Consumption
Standby Power Consumption
Dimensions (W × H × D)
Weight
2 ch × 75 W at 8 ohms, 20 Hz - 20 kHz,
0.05 %, 2 ch driven (IEC)
2 ch × 140 W at 4 ohms, 20 Hz - 20 kHz,
0.05 %, 2 ch driven (IEC)
450 W (1 Ω)
310 W (2 Ω)
230 W (3 Ω)
180 W (4 Ω)
100 W (8 Ω)
0.006 % (1 kHz, half power)
0.008 % (20 Hz - 20 kHz, half power)
130 (1 kHz, 8 Ω)
150 mV/47 kΩ (LINE)
2.25 mV/47 kΩ (PHONO MM)
0.18 mV/100 Ω (PHONO MC)
1 V/300 Ω (PRE OUT)
5 V/300 Ω (PRE OUT)
70 mV (MM 1 kHz 0.5 %)
5.2 mV (MC 1 kHz 0.5 %)
10 Hz - 100 kHz/+0 dB, –1 dB 1 W/8 Ω
1 Hz - 250 kHz/+0 dB, –3 dB 1 W/8 Ω
±10 dB, 80 Hz (BASS)
±10 dB, 10 kHz (TREBLE)
107 dB (LINE, IHF-A)
60 dB (PHONO MM, IHF-A)
70 dB (PHONO MC, IHF-A)
4 Ω - 16 Ω (Speakers A or B)
8 Ω - 16 Ω (Speakers A + B)
140 A
AC 230 V, 50 Hz
300 W
120 W
0.2 W
435 mm × 175 mm × 435 mm
18.5 kg
■ Audio Inputs
Digital Inputs
Digital Input Format
Digital Input Sampling Rate
Analog Stereo Inputs
■ Audio Outputs
Analog Outputs
Speaker Outputs
Phones
■ Others
RI
PC Interface
Specifications and features are subject to change without notice.
Optical: 1
Coaxial: 2
AES/EBU: 1
2ch PCM
32 kHz/44.1 kHz/48 kHz/88.2 kHz/96 kHz
compatible (OPT)
32 kHz/44.1 kHz/48 kHz/88.2 kHz/96 kHz/
176.4 kHz/192 kHz compatible
(COAX, AES/EBU)
44.1 kHz/48 kHz/96 kHz/192 kHz compatible
(USB)
LINE 1, LINE 2, LINE 3, PHONO (MM/MC),
MAIN IN
LINE OUT, PRE OUT
4
1 (6.3 ø)
2
USB
En
43