Advanced Operations; Custom Setup; Changing Input Names - Onkyo A-9070 Instruction Manual

Advanced Operations

Custom Setup

You can perform custom settings using SETUP on the
remote controller or the integrated amplifier. The SETUP
menu allows you to set the following items: NAME,
SHOW, HPLVL, ASb, ROUTE, and RESET.
CD SACD MD TAPE TUNER
NAME
DOCK PC GAME TV
L1 L2 L3 CX1
SHOW
PNO OPT CX2
HPLVL HP -12 HP 0 HP +12
ASb
ASb-ON ASb-OFF
NORMAL PRE
ROUTE
MAIN SPLIT
RESET
RST-NO RST-YES
Note
• When "ROUTE" is set to "MAIN", the "NAME", "SHOW",
"HPLVL" and "ASb" settings are not available.
• When the "PHONO" input is selected, "NAME" setting is not
available.

Changing Input Names

You can change the name of the currently selected input.
Choose a name from the following: CD, SACD, MD,
TAPE, TUNER, TV, GAME, PC, DOCK
■
Operating with the remote controller
SETUP
1
Press SETUP.
2
Press !/" repeatedly to select "NAME".
3
Press ENTER.
The name currently assigned to the input flashes.
4
Press #/$ repeatedly to select the name you want
to assign.
The selected name flashes.
5
Press ENTER.
The selected name flashes rapidly for a few times as
the setting is confirmed.
6
Press RETURN repeatedly to exit the setup.
■
Operating on the integrated amplifier
1
Press SETUP repeatedly to select "NAME".
2 Use the INPUT selector to select the name you want
to assign.
First, the currently assigned name flashes on the
!/"/#/$
information display. Then, the assignable names are
displayed flashing.
3
Press and hold down SETUP.
ENTER
RETURN
The selected name flashes rapidly for a few times as
the setting is confirmed.
4
Press SETUP repeatedly to exit the setup.
Tip
• By default, input names are set according to the terminal names.
Note
• If you assign a name that is already used on another input, the
name of that other input will be restored to its default.
• When the "PHONO" input is selected, "NAME" setting is not
available.
• The integrated amplifier will end the setup if there is no
operation for 8 seconds.
INPUT selector
SETUP
En
35