Using The Integrated Amplifier As A Usb Audio Device; Connecting A Pc; Installing Usb Drivers; Playing Music Files From The Pc - Onkyo A-9000R Instruction Manual

Using the Integrated Amplifier as a USB Audio Device

Using the USB port on the rear panel of the A-9000R, you
can connect your PC and play back 192 kHz/24-bit HD
audio formats.

Connecting a PC

USB
PC

Installing USB drivers

To playback the audio data stored on your PC by using the
equipment via USB port connection, you must install the
driver on your PC from the following URL:
http://www.eu.onkyo.com (for the European customer)
http://www.intl.onkyo.com/downloads/software/index.html
(for the other area customer)
For the installation procedure, see the above Onkyo Web
site.

Playing Music Files from the PC

■ Operating with the remote controller
INPUT /
1
Press INPUT / repeatedly to switch the input
to "USB".
2 Play music files from the PC.
■ Operating on the integrated amplifier
INPUT selector
1 Use the INPUT selector to switch the input to
"USB".
2
Play music files from the PC.
Note
• Depending on the audio player software used, the sound of
incompatible file formats may not be output.
• If you unplug the USB cable, the message "USB" flashes on the
information display.
• If the USB connector of your PC does not support the high-speed
2.0 standard, the audio will not be output.
• If there is no USB connection between the PC and the integrated
amplifier, the "USB" input can't be selected.
■ System Requirements (PC)
USB 1
OS Windows ® 7 (32 bits/64 bits)/
Windows Vista ® (32/64 bits)/
Windows ® XP (32/64 bits) SP3 or later
CPU Intel ® Pentium ® 4 processor 1.6 GHz or higher processor
RAM 512 MB or greater
HDD 60 MB or greater free hard drive space
Supported models
PC/AT compatible machine equipped with a USB port
compliant with the USB standard Rev2.0 HS (Intel
host controller is recommended)
Windows and the Windows logo are trademarks of the
Microsoft group of companies.
®
USB
En
35