Using The Integrated Amplifier As A Power Amplifier - Onkyo A-9000R Instruction Manual

Using the Integrated Amplifier as a Power Amplifier

Combined with a preamplifier of your choice, the integrated amplifier can be used as a power amplifier (Main mode). When it is selected, the MAIN IN LED lights. See "Connecting Your Speakers"
for connection information (➔ page 15). This is an example of connection using the preamplifier P-3000R.
Important:
• Always turn the integrated amplifier off before connecting the MAIN IN jacks.
• Before setting the integrated amplifier to Main mode, make sure that no component such as a CD player is connected to the MAIN IN jacks, as a direct connection may cause a massive blast sound and damage the integrated
amplifier or your speakers.
• This mode can be used with the following limitations:
– The volume level can't be adjusted.
– Only SPEAKERS and SETUP can be used.
– Only the MAIN IN and SPEAKERS terminals can be used.
– The Auto Standby function is not available
• To use this mode, you need to change the "ROUTE" setting
(➔ page 38).
(➔ page 39).
Preamplifier P-3000R
Integrated Amplifier A-9000R
En
27