Basic Operations; Turning On/Off The Integrated Amplifier - Onkyo A-9000R Instruction Manual

Turning On & Basic Operations

Basic Operations

Turning On/Off the Integrated Amplifier

ON/STANDBY
POWER
En
28
Turning On the Integrated Amplifier
■ Operating with the remote controller
1
Set POWER to the ON position ( ) on the
integrated amplifier.
2
Press .
The integrated amplifier comes on, and the
information display lights.
■ Operating on the integrated amplifier
1
Set POWER to the ON position ( ).
2
Press ON/STANDBY.
The integrated amplifier comes on, and the
information display lights.
Tip
• After showing the volume level from the last session, the
message "MUTING" flashes on the information display until
the speakers or headphones become active.
• After a certain time of warming up, the internal temperature of
the integrated amplifier stabilizes, and the sound is softened.
• The integrated amplifier remembers the state when power was
last turned off, and returns to that state.
Turning Off the Integrated Amplifier
■ Operating with the remote controller
1
Press .
The integrated amplifier enters Standby mode and the
information display goes off.
2
To completely shut down the integrated amplifier,
set POWER to the OFF position ( ) on the
integrated amplifier.
■ Operating on the integrated amplifier
1
Press ON/STANDBY.
The integrated amplifier enters Standby mode and the
information display goes off.
2 To completely shut down the integrated amplifier,
set POWER to the OFF position ( ).
Tip
• For details on power management settings, see "Setting the Auto
page 38).
Standby Function" (➔