HP 16500A/16501A - Adjustments
4-4. Adjustment Test Patterns
Six test patterns are required for adjusting the color module: one white cross hatch pattern, one white full
screen raster, a full screen pattern for each primary color (red, green, blue), and one black full screen
raster.
Access to the test patterns is gained through the Mainframe Test system. To access the test patterns,
proceed as follows:
1. Insert the operating system disk into one of the disk drives, then turn on the instrument to obtain
the System Configuration menu. See figure 4-1.
2. Touch the Configuration field, then touch the Test field from the pop-up menu. See figure 4-2.
4-2
Figure 4-1. System Configuration Menu
Figure 4-2. Accessing the Test System