Hp-Ib Configuration With Keypad - HP 16500A Service Manual

3. Rotate the knob to select the desired HP-IB address. The address number is shown in the HP-IB
Address field. The address number may also be entered via the keypad. Touch the HP-IB field
again to bring up the keypad. Select the new number using the keypad, then touch Done to enter
address. See figure 2-7.
4. Touch Done to exit the HP-IB Configuration menu.
Figure 2-7. HP-IB Configuration with Keypad
HP 16500A/16501A - Installation
the new selected
2-7