To remove and replace the USB cables
16800 Series Portable Logic Analyzers Service Guide
1
Perform previous procedures:
•
"To prepare the instrument for disassembly"
page 120.
•
"To remove and replace the cover"
•
"To remove and replace the front panel assembly"
page 129.
•
"To remove and replace the front panel bracket
assembly"
on page 132.
Using a Torx T10 screwdriver, remove the 4 screws
2
securing the USB cables to the front panel bracket
assembly.
T-10
screws
Reverse this procedure to replace the USB cables.
3
Replacing Assemblies
on page 122.
USB
cables
Front panel bracket
6
on
on
133