Initial Setup - Focus DVCPRO/DV User Manual

Using the FS-100 with a Computer
To move video files from the FS-100 to a computer:
• Connect the FS-100's
computer with an active OHCI compliant IEEE-1394 FireWire
port and the necessary FireWire disk drive drivers.
For More Information
Go to the FOCUS Enhancements' website (www.focusinfo.com) for more
compatibility information.
• To use the FS-100 HDD Bypass mode, refer below for more
information.
The FS-100 is compatible with any computer system that can read
FAT 32 volumes, such as Windows 98SE/ME/2000/XP and Mac
OS9/OS10.

Initial Setup

1. Connect the FS-100 through its
computer system using a standard 6-pin to 6-pin FireWire
cable.
2. Enter HDD mode and enable DD Drive.
This step is required before mounting the FS-100 to a com-
puter.
• On the FS-100 go to the
• Select
• Press
Refer to the section,
3. Connect power to the drive if necessary.
4. Consult the computer's documentation for more information.
FS-100 Portable DTE Recorder
100
Computer I/O
and
DD Drive Right
function button.
Enable
Format Screen
1394 port directly to a
COMPUTER I/O
screen.
HDD
arrow to
Connect
on page 52
1394 port to the
screen.