Table of Contents
Advertisement
FS-100 Functions
Stop Frame, No Video
These settings determine the FS-100 video output when it is in
mode.
STOP
•
STOP FRAME
Displays the first frame of the clip.
•
STOP NO VIDEO
output is
Video
EXT CTL OFF, Pause, Frame, File
These options permit the use of an external device to control the
FS-100 through the optional RS-232 cable.
RS-232 Cable Available from Focus Online Store
The RS-232 cable required to connect the FS-100 to an external control
device is Focus part number CBLA-0113-01. It and other accessories
mentioned in this manual are available at https://www.focusinfo.com/sales/
store.
•
EXT CTL OFF
Use this option when connecting an external device using an
RS232C cable.
This requires the use of a a 3.5mm-to-DB9 adapter cable,
plugged into FS-100
In Local mode, select this item to control the FS-100 with the
optional wired remote control unit.
The following options permit control functions to occur from a
simple contact closure.
•
EXT CTL PAUSE
Controls
session.
•
EXT CTL FRAME
Captures a single frame of video and records it to a file. Each
time this function is triggered, it sequentially adds another
frame to the same file until stopped.
•
EXT CTL FILE
Creates a new file during a record session without losing
frames.
Group Default
.
Off
Group Default
Control
and
Pause
Resume
port.
during a record or playback
FS-100 Portable DTE Recorder
61
Advertisement
Table of Contents
