Chapter 5 The Operator Panel; Overview; Operator Panel Features; Indicator Lights - NEC SuperScript 4200N Online User's Manual

CHAPTER 5
THE OPERATOR PANEL
O
VERVIEW
The printer Operator Panel allows you to read printer
messages and change printer settings directly at the printer.
The diagram below identifies the different areas of the
Operator Panel.
This chapter describes
• Operator Panel features, including indicator lights, the
message display, and buttons
• Using the Operator Panel menu tree
• Important tasks you perform using the Operator Panel
and menu tree settings.
Power Warning Online
Menu OnLine
Data OHT Label
Feed Item Media
Previous Next Select
O P
PERATOR ANEL

Indicator Lights

The indicator lights on the Operator Panel communicate the
operating status of the printer.
Light Mode
Power On Printer power is on or in POWER SAVE
mode.
(Green) Off Printer power is off.
Warning On Call for service (see page101).
(Red) Off Normal state, no action is required.
Blinking The printer has a problem. See the
message display. If there is no
message, call for service (see
page101).
Online On Printer is online and ready to print.
(Green) Off Printer is offline or in menu mode.
Blinking Printer is warming up.
Data On Print buffer contains data.
(Orange) Off Print job has ended or print buffer has
been cleared by pressing the Feed
button.
Blinking Data is being sent to the printer.
OHT On Media type is set to Over-head
Transparency (OHT).
(Green)
Off Media type is not set to OHT.
Label On Media type is set to Label.
(Green) Off Media type is not set to Label.
F
EATURES
Status
43